Battery Compatible with Apple iPod Nano 6G A1366 | 616-0531 200mAh 3.7V

This lithium-ion polymer replacement battery is compatible with the Apple iPod Nano 6th Generation (A1366) and is designed to replace a worn or defective internal battery.

The battery carries the reference part number 616-0531 and features a nominal voltage of 3.7 volts and an energy capacity of 0.74Wh. This corresponds to a calculated battery capacity of approximately 200mAh.

It is compatible with Apple iPod Nano 6G models with 8GB and 16GB storage.

With compact dimensions of approximately 35 × 15 × 2.5mm, the battery is designed for internal installation in compatible iPod Nano models.

The integrated red and black connection wires allow the battery to be electrically connected to the mainboard. Soldering is required for replacement.

Over time, lithium-ion batteries gradually lose capacity. This can significantly reduce battery life and may cause unexpected shutdowns or problems powering on the device.

Replacing an ageing battery may help restore the portable functionality and operating time of the iPod Nano.

This is a compatible aftermarket replacement battery manufactured by a third party and is not an original Apple product.

✅ Features

• Replacement battery compatible with Apple iPod Nano 6G
• Compatible with Apple iPod Nano 6th Generation
• Suitable for iPod Nano 6G with 8GB storage
• Suitable for iPod Nano 6G with 16GB storage
• Compatible with Apple iPod model A1366
• Reference part number 616-0531
• Lithium-ion polymer technology
• Nominal voltage: 3.7V
• Energy capacity: 0.74Wh
• Calculated battery capacity: approx. 200mAh
• Height: approx. 35mm
• Width: approx. 15mm
• Thickness: approx. 2.5mm
• Two connection wires in red and black
• Rechargeable battery
• Compact, slim design
• Designed for internal installation
• Suitable for repair and battery replacement
• Soldering required for installation
• Aftermarket replacement part manufactured by a third party
• Not an original Apple product

Typical Fault Symptoms

Replacing the battery may be useful for problems such as:

• iPod Nano has significantly reduced battery life
• Battery discharges unusually quickly
• Device shuts down despite showing remaining battery charge
• iPod Nano only starts when connected to a charging cable
• Battery no longer charges fully
• Battery percentage changes unexpectedly
• Device shuts down after a short period of use
• Battery no longer stores sufficient energy
• Existing battery has deteriorated due to age
• Battery is damaged or swollen

⚠️ Not every charging or power-related problem is caused by a defective battery. The charging connector, charging circuitry or other internal components may also be responsible.

A swollen or damaged battery must not be used or charged.

Battery Technology & Capacity

This replacement battery uses lithium-ion polymer (Li-Po) technology.

This technology allows for a particularly compact and slim construction, making it suitable for powering small portable devices such as the Apple iPod Nano.

Electrical Specifications:

• Nominal Voltage: 3.7V
• Energy Capacity: 0.74Wh
• Battery Capacity: Approx. 200mAh (calculated)
• Technology: Lithium-Ion Polymer
• Rechargeable: Yes
• Connection: Two-Wire Cable

The approximate capacity of 200mAh is calculated from the specified energy capacity of 0.74Wh and the nominal voltage of 3.7V.

Actual battery life depends on several factors, including the condition of the device, display brightness, volume level and individual usage patterns.

Compatibility

✅ Compatible with:

Apple iPod Nano – 6th Generation

• Apple iPod Nano 6G, 8GB
• Apple iPod Nano 6G, 16GB
• Apple iPod Model A1366
• All colour variants of the iPod Nano 6G

Compatible Battery Reference:

• 616-0531

❌ Not compatible with:

• Apple iPod Nano 1st Generation
• Apple iPod Nano 2nd Generation
• Apple iPod Nano 3rd Generation
• Apple iPod Nano 4th Generation
• Apple iPod Nano 5th Generation
• Apple iPod Nano 7th Generation
• Apple iPod Classic
• Apple iPod Touch
• Apple iPod Shuffle
• Apple iPhone
• Apple iPad

Important: Before ordering, the dimensions, connection wires and battery part number should be compared with the existing battery.

Dimensions & Design

The battery features a compact, slim and rectangular design with two integrated connection wires.

Battery Body Dimensions:

• Height: Approx. 35mm
• Width: Approx. 15mm
• Thickness: Approx. 2.5mm

The stated dimensions refer to the battery body, excluding the extended connection wires.

Design Features:

• Slim lithium-polymer battery cell
• Rectangular construction
• Two flexible connection wires
• Red connection wire for positive (+)
• Black connection wire for negative (−)
• Designed for internal installation
• Compact dimensions suitable for iPod Nano 6G

The battery is installed inside the device and electrically connected to the mainboard.

Soldering is required for replacement.

Correct polarity must be observed during installation.

⚠️ Important Information & Safety

This product is a compatible aftermarket replacement battery manufactured by a third party.

It is not an original Apple battery.

Due to its lithium-ion technology, the following safety precautions must be observed:

• Do not short-circuit the battery
• Do not open or disassemble the battery
• Do not puncture or crush the battery
• Do not expose the battery to excessive heat
• Do not dispose of the battery in fire
• Do not expose the battery to water
• Do not use damaged or swollen batteries
• Only charge using suitable charging electronics
• Ensure correct polarity during installation
• Do not reverse the connection wires
• Only perform soldering work using suitable equipment
• Avoid excessive heat exposure to the battery cell
• Do not apply heat directly to the battery cell contacts
• Dispose of the battery properly in accordance with applicable regulations

Installation Note:

Replacement requires opening the Apple iPod Nano and soldering the connection wires to the designated contact points.

Installation should only be performed by individuals with appropriate experience in handling sensitive electronics and lithium-ion batteries.

Improper installation may damage the battery, mainboard or entire device.