Sintech
Battery Compatible with Apple iPod Video 5G / Classic 80GB 120GB | 650mAh
Artikel number VAR2683
This lithium-ion polymer replacement battery is compatible with various Apple iPod Video and iPod Classic models and is designed to replace a worn or defective internal battery.
The battery carries the reference part number 616-0229 and features a nominal voltage of 3.7 volts and a capacity of 650mAh.
It is particularly compatible with the Apple iPod Video 5th and 5.5th Generation with 30GB storage (A1136) and Apple iPod Classic 80GB and 120GB models (A1238), provided the existing battery design and connection match.
The battery may also be suitable for certain iPod Classic 160GB models with a slim housing.
With compact dimensions of approximately 46 × 20 × 6mm, the battery is designed for internal installation in compatible iPod models.
The integrated long, angled flexible connection cable allows the battery to connect to the battery connector on the mainboard.
Over time, lithium-ion batteries gradually lose capacity. This can significantly reduce battery life and may cause unexpected shutdowns or problems powering on the device.
Replacing an ageing battery may help restore the portable functionality and operating time of the iPod.
This is a compatible aftermarket replacement battery manufactured by a third party and is not an original Apple product.
✅ Features
• Replacement battery compatible with Apple iPod Video 5G
• Compatible with Apple iPod Video 5.5G
• Suitable for iPod Video 30GB with slim housing
• Compatible with Apple iPod Classic 80GB
• Compatible with Apple iPod Classic 120GB
• Suitable for selected iPod Classic 160GB Slim models
• Compatible with device models A1136 and A1238
• Reference part number 616-0229
• Lithium-ion polymer technology
• Nominal voltage: 3.7V
• Battery capacity: 650mAh
• Calculated energy capacity: approx. 2.41Wh
• Length: approx. 46mm
• Width: approx. 20mm
• Thickness: approx. 6mm
• Long, angled flexible connection cable
• Rechargeable battery
• Designed for internal installation
• Suitable for repair and battery replacement
• No soldering required for standard replacement
• Aftermarket replacement part manufactured by a third party
• Not an original Apple product
Typical Fault Symptoms
Replacing the battery may be useful for problems such as:
• iPod has significantly reduced battery life
• Battery discharges unusually quickly
• Device shuts down despite showing remaining battery charge
• iPod only starts when connected to a charging cable
• Battery no longer charges fully
• Battery percentage changes unexpectedly
• Device shuts down after a short period of use
• Battery no longer stores sufficient energy
• Existing battery has deteriorated due to age
• Battery is damaged or swollen
⚠️ Not every charging or power-related problem is caused by a defective battery. The dock connector, charging circuitry, hard drive or other internal components may also be responsible.
Battery Technology & Capacity
This replacement battery uses lithium-ion polymer (Li-Po) technology.
This technology allows for a compact and slim construction, making it suitable for the internal power supply of portable music players.
Electrical Specifications:
• Nominal Voltage: 3.7V
• Battery Capacity: 650mAh
• Energy Capacity: Approx. 2.41Wh (calculated)
• Technology: Lithium-Ion Polymer
• Rechargeable: Yes
Actual battery life depends on several factors, including the condition of the device, the installed hard drive or SSD, display brightness and usage patterns.
Compatibility
✅ Compatible with:
Apple iPod Video – 5th Generation
• iPod Video 5G, 30GB
• Apple iPod Model A1136
• White and black 30GB versions
Apple iPod Video – 5.5th Generation (Enhanced)
• iPod Video 5.5G, 30GB
• Apple iPod Model A1136
• White and black 30GB versions
Apple iPod Classic – 6th Generation
• iPod Classic 6G, 80GB
• Apple iPod Model A1238
• Slim housing version
Apple iPod Classic – 6.5th Generation
• iPod Classic 6.5G, 120GB
• Apple iPod Model A1238
• Slim housing version
Apple iPod Classic – 7th Generation
• iPod Classic 7G, 160GB
• Apple iPod Model A1238
• Slim housing version, provided the battery and flex connection match
❌ Not compatible with:
• Apple iPod Video 5G, 60GB with thick housing
• Apple iPod Video 5.5G, 80GB with thick housing
• Apple iPod Classic 160GB with thick housing (early version)
• Apple iPod Nano
• Apple iPod Touch
• Apple iPod Shuffle
• Apple iPhone
• Apple iPad
Important: Different battery designs and housing versions were used across Apple iPod models. Before ordering, the dimensions, flex cable position and electrical contacts should be compared with the existing battery.
Dimensions & Design
The battery features a compact, rectangular construction with an integrated long flexible connection cable.
Battery Body Dimensions:
• Length: Approx. 46mm
• Width: Approx. 20mm
• Thickness: Approx. 6mm
The stated dimensions refer to the battery body, excluding the extended flexible connection cable.
The long, angled flex cable allows the battery to connect to the designated battery connector on the mainboard.
For modified iPods equipped with flash storage or alternative internal storage solutions, the available installation space must be considered.
Connection & Design
The battery features a long, orange flexible connection cable.
The cable has several angled sections and is designed to connect to the battery connector on the mainboard.
Special Features:
• Compact lithium-polymer battery cell
• Integrated flexible connection cable
• Long, angled flex cable
• Electrical contact pads at the end of the cable
• Designed for internal installation
• No conventional wired battery plug
In compatible iPod models, the flexible cable connects to the mainboard using the designated connector.
No soldering is required for standard battery replacement.
Installation
The Apple iPod must be opened and partially disassembled to replace the battery.
During installation:
• Completely switch off the device
• Disconnect the charging cable
• Carefully open the housing
• Take care around sensitive internal cables
• Carefully disconnect the existing battery connection
• Professionally remove the old battery
• Correctly position the replacement battery
• Insert the flexible cable into the designated connector
• Properly close the connector locking mechanism
• Test the device before final reassembly
Important: The battery connector is delicate. The flexible cable must not be pulled out or inserted using excessive force.
The battery cell and other internal components must not be damaged when opening the housing.
⚙️ Technical Specifications
• Product Type: Replacement Battery / Lithium-Ion Battery
• Compatible Brand: Apple
• Compatible Devices: iPod Video / iPod Classic
• Compatible Model Numbers: A1136 / A1238
• iPod Video: 5G / 5.5G, 30GB
• iPod Classic: 6G 80GB / 6.5G 120GB
• Additional Models: Selected iPod Classic 7G 160GB Slim
• Reference Part Number: 616-0229
• Battery Technology: Lithium-Ion Polymer (Li-Po)
• Nominal Voltage: 3.7V
• Battery Capacity: 650mAh
• Energy Capacity: Approx. 2.41Wh (calculated)
• Length: Approx. 46mm
• Width: Approx. 20mm
• Thickness: Approx. 6mm
• Rechargeable: Yes
• Construction: Rectangular Lithium-Polymer Battery Cell
• Connection: Flexible Cable
• Flex Cable Design: Long, Angled
• Installation Position: Internal
• Soldering Required: No
• Colour: Silver / Yellow / Orange
• Manufacturer: Third Party
• Product Version: Aftermarket
• Original Apple Product: No
• Application: Repair / Replacement Part
• Quantity: 1 Piece
⚠️ Important Information & Safety
This product is a compatible aftermarket replacement battery manufactured by a third party.
It is not an original Apple battery.
Due to its lithium-ion technology, the following safety precautions must be observed:
• Do not short-circuit the battery
• Do not open or disassemble the battery
• Do not puncture or crush the battery
• Do not expose the battery to excessive heat
• Do not dispose of the battery in fire
• Do not use damaged or swollen batteries
• Only charge using suitable charging electronics
• Ensure the flexible connection cable is properly seated
• Dispose of the battery properly in accordance with applicable regulations
Installation requires opening the device and carefully handling sensitive electronic components.