Sony Europe B.V., Zweigniederlassung Deutschland
PS2 FAT Controller Memory Card Port Module | 6B-0FCS-B008 Rev:A5 | SCPH-39004
Artikel number VAR8486
This original Controller / Memory Card Port Module was removed from a Sony PlayStation 2 FAT SCPH-39004 and is suitable as a replacement for a damaged or defective front port assembly.
The module provides both controller ports (Controller Port 1 and 2) as well as both Memory Card slots (Memory Card Slot 1 and 2) of the PlayStation 2.
The module and PCB carry the following markings:
6B-0FCS-B008 Rev:A5
E97362 FR-4
BM301
This is a genuine original component removed from a console (Original Pulled). The offered unit was specifically removed from an SCPH-39004.
The complete module is suitable for replacing damaged controller sockets, defective Memory Card slots or a mechanically damaged complete front connector assembly.
For the safest possible replacement, we recommend comparing the 6B-0FCS-B008 designation, Rev:A5 revision, connector and physical design with the original module before ordering.
✅ Features
• Original Controller / Memory Card Port Module
• For Sony PlayStation 2 FAT
• Removed from SCPH-39004
• Module designation: 6B-0FCS-B008 Rev:A5
• Additional markings: E97362 FR-4 / BM301
• 2× Controller Ports
• 2× Memory Card Slots
• Complete front connector assembly
• Genuine original component
• Condition: Pulled / Used
• Ideal replacement for damaged ports
• Internal connection via board connector
• Suitable for console repair and replacement purposes
Typical Fault Symptoms
Replacing the complete module may be useful for problems such as:
• Controller is not detected on Port 1
• Controller is not detected on Port 2
• Controller connection works intermittently
• Damaged or bent contacts inside a controller port
• Memory Card is not detected in Slot 1
• Memory Card is not detected in Slot 2
• Memory Card connection is intermittent
• Damaged contacts inside a Memory Card slot
• Mechanically damaged controller sockets
• Mechanically damaged Memory Card slots
• Broken plastic housing around the ports
• Damaged internal connector board
Not every controller or Memory Card problem is necessarily caused by this module. The controller, Memory Card, internal connection, motherboard or other components may also cause similar symptoms.
Controller Ports
The module includes both standard PlayStation 2 controller connections:
• Controller Port 1
• Controller Port 2
Compatible wired PlayStation and PlayStation 2 controllers and corresponding accessories can be connected through these ports.
Replacing the complete module can be useful if the internal contacts of a controller socket are damaged, worn, corroded or mechanically defective.
Memory Card Slots
Both Memory Card connections are also integrated into the module:
• Memory Card Slot 1
• Memory Card Slot 2
The Memory Card slots are positioned directly above the controller ports and form part of the complete front port assembly.
This allows the entire assembly to be replaced if a slot or its contacts are mechanically damaged instead of attempting to repair individual contacts or connectors.
6B-0FCS-B008 Rev:A5
The primary identification marking of this replacement part is:
6B-0FCS-B008 Rev:A5
Additional markings found on the component include:
E97362 FR-4
BM301
When selecting a replacement, we recommend comparing the 6B-0FCS-B008 designation and Rev:A5 revision with the module currently installed in the console.
The physical layout, internal connector and mounting points should also be compared before ordering.
Compatibility
✅ Compatible with:
• Sony PlayStation 2 FAT SCPH-39004 with corresponding port configuration
• PS2 FAT consoles using the same 6B-0FCS-B008 Rev:A5 Controller / Memory Card Port Module
• Compatible PS2 FAT configurations using the same physical connector and mounting arrangement
The offered module was removed directly from an SCPH-39004 console.
⚠️ We recommend checking the module number, revision, connector and physical design before ordering.
❌ Not suitable without prior comparison for:
• PS2 FAT consoles using a different Controller / Memory Card Port Module
• Modules with a different internal connector or physical design
• Sony PlayStation 2 Slim
• SCPH-7xxxx Slim consoles
• SCPH-9xxxx Slim consoles
⚙️ Technical Specifications
• Product Type: Controller / Memory Card Port Module
• Manufacturer: Sony
• Platform: Sony PlayStation 2
• Console Version: PS2 FAT
• Donor Console: SCPH-39004
• Module Designation: 6B-0FCS-B008
• Revision: Rev:A5
• Additional Marking: E97362 FR-4
• Additional Marking: BM301
• Controller Ports: 2
• Memory Card Slots: 2
• Controller Positions: Port 1 / Port 2
• Memory Card Positions: Slot 1 / Slot 2
• Installation Position: Front / Internal
• Condition: Used / Pulled
• Original Part: Yes
• Origin: Removed from original console
• Application: Repair / Replacement Part
• Quantity: 1 Piece
⚠️ Please Note
Always check the designation of the existing Controller / Memory Card Port Module before ordering.
The offered original component carries the following markings:
6B-0FCS-B008 Rev:A5
E97362 FR-4
BM301
and was removed from a Sony PlayStation 2 FAT SCPH-39004.
For the safest possible compatibility match, compare the module number, revision, internal connector, mounting points and physical design with the original component in your console.
As this is a used Original Pulled replacement part, minor cosmetic signs of previous use, installation or removal may be present.